Tilt Deck Frame Rack


Name:Tilt Deck Frame Rack
Platform length:5600mm
Platform width:2260mm
Platform height:500mm
Pulling tower diameter:160mm
Pulling tower height:2000mm
Pulling capacity:257mm
Pulling post rotation:360°
Hydraulic pressure max:70Mpa(10000PSI)
Pulling tower hydraulic thrust max:100KN
Power source pressure range:0.5~0.8Mpa
Lifting weight max:3500kg
Machine total weight:2500kg

  • Tilt Deck Frame Rack

Product Description


 Pulling and lifting platform -Tilt deck/steel plate frame rack

Our Tilt deck/steel plate platform is one lifting and pulling platform, ideal straightening rack for the repair of frame and unibody vehicles. Hydraulic lifting system, 4 anchoring blocks and accessories for ladder frame vehicle repair.

Features and benefits:

  • The auto body frame machine is controlled by hydropneumatic system. 2 separate controlling system to control frame bench lifting and drawing aligner respectively.

  • The auto body frame machine dimension is Width 2260mm, Length 5600mm, the bench deck single side Width 500mm. Q345 manganese steel plate platform and tilt deck permit a vehicle to be driven onto the bench frame for quick anchoring of chassis clamps. The cross and rectangular tie-down holes for virtually unlimited quick holding.

  • The lifting mechanism of frame bench gets patented. It is operated simply. The ram gets protected from pollutant invasion. The collision automobile can drive on and off the frame bench easily and quickly.

  • The specific Q345 manganese steel pulling post is rigid and safe.160×2000mm pulling tower can finish pulling or straightening of body frame of SUV, MPV and pickup trucks, CMB, and light trucks besides family cars.

  • 360 degree swivel pulling post can move freely along the frame bench perimeter. The upper and bottom pulling system can make any body collision repair work easily.

  • The clamping jaw made of 35CrMo alloy steel can anchor vehicle chassis firmly and safely.

  • The anchoring clamp height can be adjusted with T-type easy-rotating screw to meet different height car chassis.

  • The anchoring clamp is secured onto the frame bench with 10.9 level high rigidness bolts. It is quick, safe and reliable.

  • 35CrMo alloy steel forging pulling tower clamp can meet the straightening and alignment of damaged auto body.

  • High-rigid 8620 alloy steel 80-class pulling chain is durable, safe and reliable, and long life.

  • The tool board permits tools,clamp kits and accessories management to avoid lose.The people oriented design philosophy is loved by the majority of auto body repair workshop.

  • The auto body frame bench can be used matching with intelligent electronics and laser measuring systems.

  • The auto body repair bench is designed with Solidworks 3D stimulation software and mechanical force analysis is made with COSMOSXPRESS software. The loading capacity test is made after assembly completed.

  • The auto body frame bench surface paintings is environmentally friendly sprayed. It is strong adhesion and good wear resistance.

  • The auto body frame straightening equipment can repair executive cars, SUV off-road vehicles, pickup trucks, MPV commercial vehicles collision frames.

Hits: 【Print】 
Pre:None     Next:Lifting Deck Frame Rack

Related Products